Staffordshire Universal Clay Ridge Tile

This is our most popular Clay Ridge. It is a favourite with roofers as they are easy to install and their universal angle leaves it easy to quantify a roof.

Traditional Plain Angle Style Ridge, with a unique mould design for solid clay weathering at each joint.  No separate ridge jointers required.

Manufactured from high quality clay and baked at a high temperature to suit Irish and UK weather.

Matt Black Colour. 

400 mm Long (360 mm Cover)

Suitable for roof pitch 30 to 40 Degrees.  As angle widens, ridge sits higher on slates or tiles.

Staffordshire Universal Clay Ridge is a favourite with roofers as it can be easily fixed with 2x dry fix screw.

Fitting instructions:

Fixed with

1 no. 160mm Tex Screw & EPDM/Steel Washer

1 no. 120mm x 5mm Non Corrosive Screw (Counter Sunk Head).

Fitting instructions

1. Ridge board should be at least 50mm above top of rafter to allow secure fixing point for 2 x screws.

2.  Top row of slate/tile should be cut with 5" cover under each ridge tile for maximum weathering.

2.  We recommend the use of ventilated/non ventilated ridge roll under all dry fix ridge tiles. More exposed sites or roof pitch below 35 degrees, including hips, MUST use unventilated ridge roll to prevent water ingress. Tiled roofs should also use hip trays on all hips.

3.  Gable plates should be used to close off the gap between the top of slate and bottom of ridge, leaving the gables water tight.